« Vorherige

Nächste »

Electric Aviation Garbage truck Dumpster

Beschreibung:
The garbage box of the electric aviation garbage truck has a volume of 20m3, and the lifting range of the platform is 2400mm ~ 5800mm. Rectangular steel tube welding is used for the skeleton, and the stainless steel plate with 1.2mm thick skin is covered on the side and top of the skeleton, which is fixed on the inside of the skeleton with rivets, and the outside is glued to prevent the rainwater from leaking into the rectangular steel tube from the gap. The bottom skin is made of 1.5mm stainless steel material and a 1.5mm stainless steel filter screen. The bottom skin is inclined from both sides towards the middle, which is conducive to the water in the garbage flowing into the middle diversion trough. The middle and bottom are filter screens, and the tail is an 80mm deep water trough, which can ensure that the water does not flow out when the box is tilted. The function of the filter screen is to filter out the water in the garbage. Let it flow through pipes into the sewage tank installed on the subframe; A 1540×1100 garbage disposal hatch is opened at the upper front of the box. The box cover that matches it is formed from a single piece of checkered plate and is matched with the box opening frame. It can be opened or closed by driving with a cylinder. The rear opening of the box is 1795×1385, and it is equipped with a sealed box door operated by a hydraulic cylinder, with a maximum opening Angle of 68°. There is a side door at the front end on the right side of the box, which is convenient for collecting the garbage on the bottom The side of the electric aviation garbage truck body should be equipped with escalators and handles to ensure that staff can easily get on and off the platform when the body descends to the lowest position The rear part of the body should be equipped with a rear door that can be conveniently opened, closed and locked. The lower part of the body should be equipped with struts or other reliable safety devices to prevent the body from falling The top of the electric aviation garbage truck compartment body should be equipped with a garbage receiving port. The diameter of the maximum incircle of the receiving port should be no less than 800mm. The cover of the garbage receiving port should be equipped with a locking device, and the compartment body should take measures to prevent sewage from dripping to the ground Under the rated load, the lifting speed of the platform of the box body should be 80mm/s to 150mm/s Jiangsu Tianyi Aviation Industry Co., Ltd. Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China Shanghai Office: Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China Tel: +86 21 50496068 / +86 21 50496058 / +86 400 9980 919 Mobile: +86 137 -6133 -5725 (As WeChat) +86-134 -7248 -8657 +86-195 -1651 -9903 +86-137 -7424 -8052 +86-137 -7129 -7873 E_ mail: joinsun@jstianyi.com.cn airport.gse@jstianyi.com.cn Website: www.tianyi-gse.com
Allgemeine Details:
Verkauft von:	ohusuhodinozojo (10 / # 1) Grad ohusuhodinozojo
Email:	yctianyi@aliyun.com
Annoncen Details
Annoncen ID:	737880
Annoncen Aufrufe:	37
gültig bis:	2026.02.10 (in 120 Tage)
Erstellt:	2025.10.13
Aktueller Grad ist	(danach 0 Stimmen) Grad